Consultations : (+371) 29 149 905

Taga Harmony PF-1000 upgrade

Taga Harmony PF-1000 upgrade.

Taga Harmony filter

    As it is said, there is no harm without good. After several years of successful Taga Harmony PF-1000 sales finally, come in contact with the first defect - burn out the "power on" LED.

PF1000 inside view

I got a spare part from the European distributor quite quickly and got into work. Immediately I would add that it took a little time and it was quite simple.

 

At the same time, it was thought that this filter would be slightly improved. I decided to lay the inside of the body and the lower lid with vibration damping material 

PF-1000 Taga

 

and replace the IEC socket with the Furutech FI-06R NCF. 

Gluing needed a hot air dryer, but the nest was supposed to use a flat file as the FI-06 socket was slightly wider than the original. But the fixing holes corresponded completely.

IEC Taga

 

 In general, spending a couple of hours and 40 euros on IEC socket and 2 euros on a "Silent coat" damping mat provides a sound enhancement of the audio system.

Taga PF1000 NCF

 

 

Leave your comment
Comments
08/03/2021 18:51
Thank you. I was thinking exchange the iec, now it's for sure. I will put the furutech fi-09 wich i have on amp and dac, and makes a pretty difference from the 06 that i had before on the amp.Can't find the electric dumping material
16/04/2021 01:56
[url=http://vslevitrav.com/]levitra pro pas cher[/url]
06/05/2021 07:25
<a href=https://vsdoxycyclinev.com/>buy doxycycline 100 mg online rx[/url]
21/02/2022 20:07
Hi,

my have same filter. It seems, that toroidal conductor failed. Waiting for spare part.