Taga Harmony PF-1000 upgrade
-31 October 2017
Taga Harmony PF-1000 upgrade.
October 31, 2017, Tuesday
As it is said, there is no harm without good. After several years of successful Taga Harmony PF-1000 sales finally, come in contact with the first defect - burn out the "power on" LED.
I got a spare part from the European distributor quite quickly and got into work. Immediately I would add that it took a little time and it was quite simple.
At the same time, it was thought that this filter would be slightly improved. I decided to lay the inside of the body and the lower lid with vibration damping material
and replace the IEC socket with the Furutech FI-06R NCF.
Gluing needed a hot air dryer, but the nest was supposed to use a flat file as the FI-06 socket was slightly wider than the original. But the fixing holes corresponded completely.
In general, spending a couple of hours and 40 euros on IEC socket and 2 euros on a "Silent coat" damping mat provides a sound enhancement of the audio system.
